Planer BT37 Mark II bench top incubator

From

part of

Planer BT37 Mark II bench top incubator 2

product-Planer-BT37-Mark-11-bench-top-incubator-hero

For consistent humidified culturing

Designed to protect and care for every embryo

Providing consistency in temperature and pH control combined with ergonomic, precision-engineered functionality, the BT37 Mark II protects and cares for your embryos and gametes.

Availability

This product is available for sale in Europe, the U.S.A, Canada, and Australia as well as selected countries in the rest of the world.

The BT37 Mark II keeps every vital parameter temperature, CO2 and reduced O2 – consistent. It has been designed to work with our SignipHy™ pH monitoring system.Its soft close lid and ergonomically designed twist-locks give you improved chamber access. The BT37 Mark II is simpler than ever to use, with easy-change humidification bottles.

Offering multiple functional improvements, great design and effective homeostatic controls, you can see at a glance the temperature and alarm status and can change settings at a touch. The BT37 Mark II shows our commitment to care throughout every patient cycle.

Planer BT37 Mark II bench top incubator 4

Emergency Power

Integrated 2hr battery backup

Alarm functions

Event/alarm log on display
Humidification system alarm
Alarms can be muted during servicing
Bottle replacement reminder alarm

Remote monitoring

Connectivity to clinic network
Ready for SignipHy pH monitoring system

Password protection

Prevents accidental power off
Prevents unauthorised parameter change

Humidification system

Works with premixed gas
Minimal tubing to mitigate kinking and gas reduction
Rapid recovery to optimal temperature, gas and humidity
Improved user-friendly bottle design
Easier bottle replacement

Service friendly

Easy hatch opening for battery replacement
Easy filter replacement/cover removal
Service is sold separately and recommended

Full contact plates

Consistent heat distribution
Absolute control to 0.1°C
Seven point temperature control
Large range of culture dish sizes accepted

Product Specifications

The BT37 Mark II has been developed in conjunction with PLANER™; all trademarks acknowledged. Specifications may change.

System
Dimensions (WxDxH)	435 mm wide x 330 mm deep x 185 mm high
Weight	17 kg
Storage temperature	-10°C to +50°C
Storage humidity	5% to 95% relative humidity non-condensing
Storage special instructions	Recharge every 4 months by connecting to the mains power supply for 24 hours
Capacity
Dishes per chamber	4 x Nunc® 4 well Petri dishes 10 x Nunc 30 mm Petri dishes 4 x Minitub 5 well Petri dishes 4 x Falcon® 60 mm Petri dishes
Internal Battery
Internal battery backup	2 hour backup
Control
Temperature control range	(ambient + 5°C) to (ambient + 20°C) 40°C max.>
Temperature measurement accuracy	± 0.2°C
Temperature control accuracy	± 0.1°C measured after any transient effects due to set-point changes have subsided
Flow control range	0 ml/minute to 900 mL/minute. Normalized to 0°C, 50% RH and 1 bar
Flow Accuracy	The greater of ± 10% or ± 3 ml/minute
Flow control accuracy	The greater of ± 5% or ± 2 ml/minute measured after any transient effects due to set-point changes have subsided
Gas Supply
Gas supply	Premixed gas. Typically 6% CO₂, 5% O₂, 89% N₂
Supply pressure	1.5 ± 0.15 bar
Connectors	SWAGELOK 1/4” tube fitting
Monitoring
Local area network (LAN)	10 Base T Ethernet – RJ45 shielded Modbus-TCP-IP protocol
Independent temperature monitoring	Independent sensors can be fitted to the monitoring ports Recommended sensor type: PT100 Class A to EN60751 Maximum diameter: 2.51 mm
Power
Power requirements	100 – 240 V~, 50/60Hz, 2 A

Product codes

Product	Order Code
Planer BT37 Mark II Benchtop Incubator	GDBT37-02-WW-CS
Bottle pack of 6 (incl. Syringe Filter) – only BT37 Mark II	AY200246
Bottle pack of 6 (incl. Syringe Filter) – BT37 Mark I (can be used in BT37 Mark II with additional part)	AY102295
Accessories
1 Magnetic pads for BT37 Mark II	MG101383